I design this NEW IDEA of bucket.

The smaller part of the bucket can slide to increase the volume of the filament rejected by the printer.

WHAT'S NEW?

The volume is tripled compared to traditional poop buckets!

NOTICE:I NOTICED THAT THE BAMBU LAB A1 HAS A FAN THAT THROWS HOT AIR TO THE RIGHT SIDE OF THE BUCKET AND FOR THIS REASON I ALSO INSERTED A HONEYCOMB GRILL TO DISSIPATE THE HEAT COMING FROM THE FAN THROUGH THE POOP BUCKET!

NOTICE:

I still need to print this bucket because I'm waiting that Bambu Lab refills his store so I can buy the color I like to print the slider bucket.

PROFILE:

I have already SLICED many profile and what you find is the best in my opinion.

NOTICE:

THE SLIDERS HAVE A LOW TOLERANCE, SO IT DOESN'T FLY AWAY THE SECOND PART OF THE SLIDED BUCKET.

IT SHOULD BE GOOD FOR MY TASTY.

NOTICE:IN THE PROFILE YOU WILL FIND A THIRD PIECE OF 1 mm HEIGHT, THIS MUST BE GLUED UNDER THE BASE OF THE SAIL-SHAPED BUCKET. IT IS ESSENTIALLY A THICKNESS THAT ALIGNS THE HEIGHT DIFFERENCE BETWEEN THE TWO PIECES.

THE ADVANTAGE OF HAVING SHIMS IS THAT YOU CAN INCREASE THE HEIGHT ACCORDING TO YOUR NEEDS PRECISELY BECAUSE MAYBE A PERSON CAN HAVE A BASE OF SUPPORT, SUCH AS A TABLE, NOT REALLY STRAIGHT.

NOTICE:YOU CAN THEREFORE ALSO PRINT 3 THICKNESSES OF DIFFERENT HEIGHTS SO AS TO ALSO ADJUST THE HEIGHT OF THE POOP BUCKET SLIDER BASED ON YOUR PLEASURE.
REMEMBER THAT THE HEIGHT BETWEEN THE TWO PIECES OF THE BUCKET IS 1mm!

If you have problems about this model, just send me a private message and I'll help you.

Give me a like and follow my page.

Thank you to support me and happy printing.