University of Tennessee Light Box

Modeled in Fusion 360

I included two different back plates. The first has two holes and is for LED lights that are to be soldered in using an on/off switch, a DC power jack, and an AC adapter. That's how I build my light boxes. The switch hole is 8.2mm x 13.5mm. The DC power jack hole is 8mm. The materials I use for this are listed below. The second plate has a single generic hole 8mm x 16mm to be used with whichever lights you prefer. I chose not to include a hanging hole on this model as I intended it to stand on its own.

Feel free to use this as you see fit. Please don't sell the stl or 3mf files as I would like to keep them open and free. If you would like to sell the actual model, that's fine too, but I would ask that you consider buying me a coffee or something. My cashapp is $dejjen.

Amazon Affiliate links:

LED Lights - 12V: https://amzn.to/3uLFZ8t

On/Off Switch: https://amzn.to/3RlvX5M

DC power jack - female: https://amzn.to/3GDOgOg

AC Adapter - 110/220V to 12V DC: https://amzn.to/3RcgDbw