Single screw wall-mounted magnetic charging dock that fits following Razer mice:

• Razer Naga Pro (in pics)
• DeathAdder V2 Pro
• Basilisk Ultimate
• Viper Ultimate

!!!! Only test fitted with the Naga Pro! It's possible the wall clearance required for longer mice to not be enough (for the Basilisk which is a bit longer for example). I've included the .f3d file so you can make the bottom plate a bit thicker so it would fit properly.

Required hardware:

• 2x 3mm diameter Pogo connectors (like these). It can work with some thick copper wire but the fitting must be very precise so you get perfect contact. The extra tolerance provided by the springy connectors is a huge improvement.
• An USB cable to solder on the pins. The red cable matches the right side connector on the mouse (with the mouse oriented in its normal operation position)
• 10x5x2mm magnet - found it to work best to keep the mouse in place. You can change the shape in Fusion360. Careful with the N/S orientation so it doesn't repel the mouse.
• Something to prop them up on the wall

Overall the tolerances are very tight, I had to drill with a 3mm bit to make the Pogo connectors fit properly, and the magnet is held by friction alone and doesn't have any chance of falling or sticking to the mouse. Everything is held together by Gorilla Glue.

Included a stripe for AMS/MMU multicolor prints, looks sleek IMO but totally not functional or necessary in any way.

Mine (and my wife's) were printed in eSUN PLA+ (Black/White) on a Bambu X1C.

Print the top part face-down, supports might be needed for the cable hole.