This is a desktop stand that can accommodate an Apple iPhone Magsafe charger, Apple Watch Charger, and Airpod Charger (through lightning).

The design was originally made by JIPyro and posted on Thingiverse. I have modified the design and shored up some tolerances.

There are two versions: One for MAX size iPhones and one for all the rest (non-max size). The non-max size version is shorter to accommodate the camera housing and cases.

The non-max size will fit MAX phones as well, but the MAX size stand WILL NOT fit standard size phones (camera clearance issues).

Print with PLA or PETG of your choice. Resolution doesn't matter. For best results, print internal perimeters first.

The fit of the watch puck and magsafe puck may be very tight. Place the dock on a table, face down with the puck in the hole and gently press down to seat it.

This has been tested and fits the original Airpods, Gen 2, Gen 3, and Pro.

Tested and works with all iPhone 12 and 13 models.

NOTE: You will need to have a magsafe compatible case as the phone needs to grip via the magsafe to hang on the stand.

NOTE: The lightning cable used in this design is the OEM Apple USB-A to Lightning cable. The OEM Apple USB-C to Lightning WILL NOT FIT! It has a larger housing around the Lightning connection. Check the Remixes to see if there is one with the larger hole.

I also used stick on rubber feet to keep the stand from sliding. More specifically, these: https://amzn.to/3FzI4qC

There is a known error in the mesh (back of the slant). The file still slices correctly.