These are pegs for keeping your IKEA Skadis boards off the wall without having to put more screws in the wall. They work and have been tested with white, black, and 3D printed Skadis boards. They are meant to be a snug fit. There are 2 sizes, 15mm and 20mm. The 20mm should be the same size as the pegs that come with the Skadis board. The 15mm was made to fit with these to stop the board from flexing too much against the printer under weight: https://www.printables.com/model/527051-ikea-skadis-mount-for-bambu-lab-x1cp1s-requires-am
For some reason the brown non-coated Skadis boards have thicker holes, so if people want me to resize the peg for those I can. They still fit in the brown boards, but are a little loose. I've also found that using them with these boards it's a very tight fit, but does fit: https://makerworld.com/en/models/46115#profileId-52091
If you are looking for some wall mounts for the top of a board I have used these pressure fit pegs along with 2 of these at the top to attach it to the wall: https://makerworld.com/en/models/19480#profileId-32716
Prints with no supports or brims required.
Let me know if there is anything you want me to adjust, these are my first ever 3D models and would like to hear any feedback.