Advertisement
December 19, 2023
Advertisement
This is my Standing Build Plate & Sticker Sheets Holder remix of the Standing or Wall Mounted Build Plate Holder (https://makerworld.com/en/models/60976#profileId-63399) created by KG3Dee (https://makerworld.com/en/u/3292952)
I kept the 3-plate holder model but added extra storage for the Build Plate Sticker Sheets.
Bambulabs
Bambu X1C
No
No
.2mm
20%
Bambu Lab
Charcoal
PLA Mate
My print settings:
Material: Bambu Lab PLA Matte (Charcoal)
Nozzle: 0.4 nozzle
Plate Type: Cool Plate
Layer Height: 0.2mm
Infill: 20%
Infill Pattern: Gyroid
Wall Loops: 3
Wall Generator: Arachne
Avoid Crossing Walls: True - 100%
This model has two (2) versions (both require no support):Standing Build Plate and Sticker Sheets Holder v1
This is the one I printed. This version is best if the holder is positioned against a flat surface (e.g., next to the printer (left), a wall, a cabinet, etc.)
Measurements:
12.0" L x 2.85" W x 3.75" H
0.32" allowance on the build plate holders (x3)
0.61" allowance on the build plate sticker holder
Print time: 5h 29m
Standing Build Plate and Sticker Sheets Holder v2
This version is best if the holder is positioned as a stand-alone organizer (not against a flat surface). This will help ensure your plate stickers will not bend.
Measurements:
12.0" L x 2.85" W x 7.3" H
0.32" allowance on the build plate holders (x3)
0.61" allowance on the build plate sticker holder
Print time: 6h 24m
Author : https://www.thingiverse.com/jksantos/designs
Source : https://www.thingiverse.com/thing:6381271