Benchy paint No support by Mick23

Mick23

Art>Sculptures

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

normal corner

Designer

1.1 h

1 plate

4.7(48)

WITH AMS 2 COLORS NO SUPPORT

Designer

1 h

1 plate

4.9(18)

mirrored profile of the other corner

Designer

1.1 h

1 plate

5.0(6)

QUICK PRINT WITHOUT IRONING

Designer

33 min

1 plate

4.5(2)

Click to see more

Boost

347

470

119

785

327

Released

Description

Hi, here a little model of a Benchy.

It print Flat with nos supports,

If the slicer says it need supports, Ignore that it need supports.

When its printed, draw imaginaire dot lines on the benchy paint.

Its between these right dotlines you need to heat with a lighter underneath, back and forth until the temperature is just above 65 degrees.

Now you can fold it over and push on it to a corner of a table or shelf.

When it is cool down, you can heat between the other imaginary dot lines.

And repeat the previous steps

If you have any problem , let me know

Look also my cube paint

https://makerworld.com/nl/models/55104#profileId-56614

And please if you like it , share it and print it!!!! And show me your pictures. and rate the print profile please
Like it if you want and follow me for other items.
Comments welcome

I added also a print profile in mirror mode if you want

Comment & Rating (119)

@uncle.pennybags

Print Profile

WITH AMS 2 COLORS NO SUPPORT

Turned out great! I didn't have any blue, so Benchy is stuck & sinking in ice!

The designer has replied

@Mick23

Thanks for sharing, look also my other prints

@calebholloway08

Print Profile

normal corner

benchy came off but looks good

The designer has replied

@Mick23

Hi, it is not possible that it came off on normal print condition, because the bechyis incorporated in the splash see attached picture of slicer, can you show me your presetin your slicer? Maybe i can help you resolve your printer problems. Best regards

@AiTeee

Print Profile

0.12MM Dual colour sea is blue version

worked like a charm. Everybody loves it.

(Edited)

@adam_marton

Print Profile

normal corner

amazing

The designer has replied

@Mick23

Thanks for sharing, look also my other prints

@RoarLionman

Print Profile

0.2mm layer, 2 walls, 10% infill

first print out of the box, great example of the technology

@marrena

Print Profile

normal corner

prints very good

The designer has replied

@Mick23

Thanks for sharing, look also my other prints

@thisnoise

I've done dual colour, very simple, I have uploaded the profile aswell. Printed at 0.12mm in around an hour :) I designed a small sharfin also https://makerworld.com/en/models/56951 (Designer had not uploaded a dUal colour design at the time of my upload)

(Edited)