Analog hygrometer holder in AMS

Digital hygrometers are very cheap and can be found anywhere on the internet. This also is the case for the many holders, most of the time a desiccant container for in between the First Stage Feeders of the AMS where the digital hygrometer can be placed. I tried those. But I experienced that the digital hygrometers were not very precise. Also, I like these analog hygrometers more because of the aesthetics and they don’t require batteries. Ever!

Features:

• Choose filament to liking.
• No support needed.
• Fits snuggly in the AMS front between the second and third ‘First stage Feeders’.
• Dimensions holder: height = 65 mm, width = 44 mm.
• Diameter circle: 36 mm.
• Cap can be used to glue in nuts to weigh down the holder.

Analog hygrometers can be purchased at AliExpress.

Activate/calibrate an analog hygrometer before first use.
Store it, wrapped in very wet tissue paper, in a small zip lock bag for 6 hours.
This will saturate the single horsetail hair that’s inside and calibrates it to 100%.

Disclaimer:

This design is free to download including the accompanied files. By downloading this design, you agree to the following:

• as with all designs that you didn’t make and test yourself, mine may work or won’t for you,
• I can’t give any guarantees for the print you make, the way you do it and which tools u use,
• no rights can be derived and I can’t be held liable.

If you have questions or suggestions, please contact me by message. In case you need an adjustment or re-design, I’ll perform those upon payment.

If you like what I made and want to tip me for it, please do so at your discretion at Ko-Fi.

Have fun and enjoy being creative!