When viewed from the right angle, the model shows the Bambu Lab logo. Each cube is 5mm and the sculpture is 15x23x15 cubes. I never managed to obtain a functional print. It was tedious to design, so I'm posting the model here in case anyone wants to try printing it.

Click on Raw Model Files to get the STL.

A few ideas on how to print it:

Putting this beams through each row wouldn't work, it would still leave overhangs and ruin the effect.

It could be possible to suspend the scuplture in clear PLA, but an AMS, the right settings, and clear PLA would be needed. The AMS isn't necessary if you print the reverse of the sculpture in clear PLA, leaving bubbles in the parts that should be there.