[Remix] Kar98k bolt action ballpoint pen
Remixed by
[Remix] Kar98k bolt action ballpoint pen
Remixed by
Boost
121
175
17
Print Profile(2)
![[Modified stock] 0.08mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/USfa3e0c7df20a4f/design/2024-01-05_9a5f9585f1748.jpg?image_process=resize,w_100/format,webp)
[Modified stock] 0.08mm layer, 2 walls, 15% infill
Designer
7.2 h
4 plates
![[Original stock] 0.08mm layer, 2 walls, 15% infill](https://makerworld.bblmw.com/makerworld/model/USfa3e0c7df20a4f/design/2024-01-05_9fdf82b2f8f4b.webp?image_process=resize,w_100/format,webp)
[Original stock] 0.08mm layer, 2 walls, 15% infill
Designer
7.2 h
4 plates
Boost
121
175
17
0
293
209
Released
Description
This is a reupload + my own remix for the bolt action ballpoint pen by FreddyZ. Unfortunately, the pressure fit did not work for me, so I modified the stock for an M2x4 screw to keep the barrel in place.
https://www.printables.com/model/265990-kar98k-bolt-action-ballpoint-pen
Comment & Rating (17)
All
7.2 hour is kinda long for this size of model, could it print with 0.2 layer high?
The designer has replied
1
Reply
Yes, totally. I even tried it but personally prefer 0.08. I can upload a 0.2 profile if you want?
0
Reply
Replying to @ari.simulevski
Yes please
0
Reply
Print Profile
[Modified stock] 0.08mm layer, 2 walls, 15% infill
This is my favourite print. Thank you.
0
Reply
Print Profile
[Original stock] 0.08mm layer, 2 walls, 15% infill
Was not printing nicely and kept failing. I had to print it around four times.
0
Reply
j'adore
0
Reply
Print Profile
[Modified stock] 0.08mm layer, 2 walls, 15% infill
perfect
0
Reply
Print Profile
[Modified stock] 0.08mm layer, 2 walls, 15% infill
could.not get it to print even at slow speeds half way up it falls. even added a oversize brim trying to hold it. gonna go in the slicer and see if I can flip the profile to laying down... should save loads of time as well on the print side
(Edited)0
Reply
Print Profile
[Modified stock] 0.08mm layer, 2 walls, 15% infill
0
Reply
Print Profile
[Modified stock] 0.08mm layer, 2 walls, 15% infill
0
Reply
Print Profile
[Modified stock] 0.08mm layer, 2 walls, 15% infill
0
Reply
Print Profile
[Modified stock] 0.08mm layer, 2 walls, 15% infill
0
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld