FOR A MORE DETAILED PRINT AND ASSEMBLY INSTRUCTIONS PLEASE VISIT THE PRINTABLES LINK!!!!!!!!!!!
https://www.printables.com/model/279013-rbx24-scx24-rock-bouncer

Here's V2 of the RBX24, Rock Bouncer 24th scale Chassis for the SCX24. Based on 2 versions of the IRL Revolution 2.0 chassis.
https://www.wideopendesign.com/revolution-2-0-rock-crawler-chassis
https://www.wideopendesign.com/revolution-2-0-rock-crawler-4-seat-chassis

While the overall design of the chassis I don't want to be remixed, I do want the community to get creative. I will allow remixing of the panels, electronic mounts, and decor pieces. They will all be uploaded again separately for you to remix if you choose.

https://www.printables.com/model/279027-rbx24-remixable-parts

Interested in selling this model? Please Contact me!

There are two diffrent frame designes. In Grey and blue is an example of the Square body and Single Panel Version. Orange and black is an example of the Round Body and Multi Panel version. Each body design has 4 different roof variants. Both models have the angled 2-bar or angled 3-bar roof. The flat bar roof does not have an angle in the front. There are also 2 hood versions, framed hood, and a flat hood. Orange has the frame hood while grey has the flat hood.

What You Need To Print:
Frame:
You need to choose one frame design. Whether it's square body or round body, Single panel or multi-panel.
You will also need a roof design corresponding to the body you chose.

1x body left
1x body right
1x roof

Universal Body Parts:
1x battery mount
1x ESC mount
1x hood (either frame hood or flat hood.)
1x front bar
1x rear bumper
Optional: 1.5mm offset. - This offset is primarily to offset the shocks from the body. I used one on top and bottom of each shock. 1.5mm worked best for me.

Decor:
1x cooler
1x interior
2x helmet

Panels:
1x hood panel (Either hood panel or one-panel hood)
depending on your panel choice you need either
2x Panels A-E
or
2x One Panel Side and 2x Panel C
(recommended to mirror panels for each side.)
1x rear panel

FOR A MORE DETAILED PRINT AND ASSEMBLY INSTRUCTIONS PLEASE VISIT THE PRINTABLES LINK!!!!!!!!!!!
https://www.printables.com/model/279013-rbx24-scx24-rock-bouncer