Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Ivory White Transmission Distance: 4
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
Swap Instructions:
Start with Ivory White
At layer #11 (0.96mm) swap to Ash Gray
At layer #17 (1.44mm) swap to Dark Red
At layer #20 (1.68mm) swap to Charcoal for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.