Lego Duplo compatible building block 2x2
Copyright Claim
Lego Duplo compatible building block 2x2
Boost
10
33
11
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
21 min
1 plate
Boost
10
33
11
0
88
63
Released
Description
A simple 2x2 building block compatible with Lego Duplo
- Rounded corners to make it suitable for kids
- No supports
- .step file for customisation
Dimensions are pretty much exactly from the original, I just made some changes to make it more suitable for 3D printing. (thicker walls, supports for bridging)
It's a very good fit with my printer, make sure there is no elephant foot on your print!
If there is one you can simply connect two blocks a few millimetres and wiggle them around a bit.
If you are still having problems feel free to change up the design with the provided .step file.
If you don't have any experience with CAD software you can also comment or send me a message and I will make a version with a loser/tighter fit.
P.s.: I‘m sure you can easily print it under 1h but my printer isn’t suited for high speeds.
Have fun printing!
Comment & Rating (11)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Perfect Print
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Good overall but the pins need to be moved outwards otherwise they won't fit into the other blocks
0
Reply
project copied by me
The designer has replied
0
Reply
Literally not true, I had this uploaded years ago on printables already.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
top didn't attach to other duplo blocks, position of dots must be off
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
noppen passen nicht mit original
0
Reply
the nipples on the top are to loose to fit
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Bed Adhesion Issue:I think, the surface is little, but the modell is good. i used skirt.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Related Models
© 2024 MakerWorld