Bambu Lab P1P Rear-Cover whith opening PTFE tube
Remixed by
Copyright Claim
Bambu Lab P1P Rear-Cover whith opening PTFE tube
Remixed by
Boost
4
6
3
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
57 min
1 plate
Boost
4
6
3
0
19
4
Released
Description
Since I printed out the complete PegBoard for my P1P, and also a top cover, I had to use the PTFE tube through the opening in the metal housing.
I used the model 5753074 from thingiverse (it fits perfectly into the opening of the frame, the tube passage had to be reworked a little with a round file because it is too narrow).
I then made an opening in the rear cover at the appropriate place.
Printed with 15 % infill and support on pressure plate for the PTFE opening and no brim
P1P ptfe passthrough:
https://www.thingiverse.com/thing:5753074
P1P Pegboard:
https://wiki.bambulab.com/en/p1/modplate-customization#modplate-template
Comment & Rating (3)
All
Can you please help in what the name of the part that is holding the ptfe tube on the top right of the picture or is that part of the P1P?
Thank you
(Edited)The designer has replied
0
Reply
This is the original PTFE tube holder from the P1P, but I have since replaced it with a Y splitter for AMS.
0
Reply
Replying to @scorpakapeter
ahh, thank you for your reply :)
0
Reply
No more
Related Models
© 2024 MakerWorld