Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Blue Transmission Distance: 1
PLA PolyTerra Army Red Transmission Distance: 0.3
PLA PolyLite Yellow Transmission Distance: 11
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #5 (0.36mm) swap to Blue
At layer #9 (0.52mm) swap to Army Red
At layer #13 (0.68mm) swap to Yellow
At layer #29 (1.32mm) swap to White for the rest.