Pokemon Pummeluff / Jigglypuff Lightbox
Print Profile(4)
Description
Nicer result with 2 mm nozzle.
Remove the purge lines before printing, otherwise they may be in the model.
All lids have a hanging hole.
Lid 1 with hole for a cable.
Lid 2 with battery compartment and switch, printed in PLA and PETG as support interface. I used M3 threaded sleeves to attach the battery cover.
I used these battery compartments: https://www.amazon.de/dp/B0C2Q41DTT?ref=ppx_yo2ov_dt_b_product_details&th=1
For this you need a 5v LED strip
and these switches: https://www.amazon.de/dp/B08CY41YT5?ref=ppx_yo2ov_dt_b_product_details&th=1
Lid 3 for a battery compartment with remote control. Just attach the front part a little with hot glue so that you can open it again to change the battery. The remote control works through the front.
The lid is intended for this battery compartment with LED strips: https://www.amazon.de/dp/B08QCMFJW8?ref=ppx_yo2ov_dt_b_product_details&th=1
Filaments used:
Bambu PLA Matte Black
Bambu PLA Matte White
Bambu PLA Matte Dark Blue
Bambu PLA Basic Pink
Comment & Rating (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
