Portable Cable Organizer / Winder Shared by Exotech

squinn

Shared by

Household>Other House Models

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 6 walls, 25% infill

10.7 h

6 plates

4.6(54)

version selectable, 0.2mm layer, 3 walls, 15% infill

7.5 h

6 plates

5.0(6)

Boost

108

501

407

Released

Description

Original Designer is Squinn

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away.

This model is an easy print that requires no supports, and three different sizes are provided to accommodate cables of different lengths. If you're not sure which to choose, I'd recommend starting with the “medium” size.

After printing, you'll want to place the cable within the groove at its halfway point, close the lid (which is intentionally designed to close tightly), wind up the cord clockwise using the handle, and then extend by simply grabbing the cable by both ends.

Update 2023-09-06:

Alternative smooth-sided versions of all three sizes have now been added, and also the handle design was slightly adjusted to add a small fillet and chamfer to decrease the bridge distance. Here's a close-up picture of the updated handle on the knurled and smooth-sided versions:

Comment & Rating (91)

@FM071

Print Profile

0.2mm layer, 6 walls, 25% infill

Used different PLA. Now it works well!

(Edited)

The designer has replied

@Exotech

check your printer!

@Exotech

Can you please Update our Feedback ? :)

@FM071

Don't really know what to check. Have calibrated. I'll try again this week.

@user_4094317166

Print Profile

0.2mm layer, 6 walls, 25% infill

Print quality is amazing, the lid snaps into place and holds itself there tightly, and the turning mechanism, although veeeerrryy slightly jittery, works perfectly.

The designer has replied

@Exotech

"Thank you very much for the feedback, I'm glad about it. Happy printing!"

@Julasse

Print Profile

version selectable, 0.2mm layer, 3 walls, 15% infill

Es funktioniert einwandfrei. Habe erstmal Medium gewählt. Es werden noch einige Drucke folgen.

@Keiton_dad_1234

Print Profile

0.2mm layer, 6 walls, 25% infill

It works great, and I printed five of them, but the last one I made wasn't made as well and when it tried to take it of it broke.

The designer has replied

@Exotech

Could you please take a moment to explain in more detail where the problem lies? Understanding the root cause would greatly assist me in addressing and resolving the issue effectively.

@chriswortman

Print Profile

version selectable, 0.2mm layer, 3 walls, 15% infill

Turned out great!

@thohostgt

Print Profile

0.2mm layer, 6 walls, 25% infill

perfekter Druck / Perfect Print.

(Edited)

The designer has replied

@Exotech

thank you for your feedback 😊 can you maybe upload a foto of your work 🙌

@shrunyan

Print Profile

0.2mm layer, 6 walls, 25% infill

5 stars. For some reason bambu handy sees the a failed print for this model and won't let me rate above 3 stars. great model. ignore the marking, that is from the glue on the cool plate. need to figure out a solution to that. printed in place. mechanically works great. used bambu pla matte dark blue (11602)