Bambu Studio Settings:
The settings are just a recommendation, however you can print with the settings you are already used to using!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Tough Black Transmission Distance: 0.6
PLA BambuLab Tough Gray Transmission Distance: 1.8
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Gray
At layer #13 (1.12mm) swap to Silver
At layer #15 (1.28mm) swap to Ivory White for the rest.