Toroidal Launcher Gearset - 1:3 ratio
Copyright Claim
Toroidal Launcher Gearset - 1:3 ratio
Boost
19
38
9
Print Profile(1)
Toroidal Launcher Gearset - All parts (1:3 ratio)
Designer
58 min
1 plate
Boost
19
38
9
0
203
106
Released
Description
Toroidal Launcher Gearset - 1:3 ratio
This is an add-on modification for my Toroidal Launcher that is designed to drop-in and replace the default gears used for the first two stages. This gearset provides a 1:3 ratio and can be used to lower the gear ratio so less overall effort is required at the cost of having to turn further; this can help make it easier to startup and launch small heights.
Specifications
- 1:3 gear ratio
- Sun gear: 36 teeth
- Planet gear: 18 teeth
Printing Tips
- The included print profile adjusts several of the standard settings and is what I've found works the best for speed and quality when printing gears.
- Arachne wall generator
- 25% infill, 5 bottom/top walls
- 75 mm/s inner and outer wall speed
Related Designs
This design is part of a collection of modifications for my Toroidal Launcher design and allows users to customize the launcher to their liking.
Comment & Rating (9)
All
Is there an updated design for the HousingCarrierHolder, as you can't fit this without updating this piece. The sun gear in the centre is too large to fit this original
The designer has replied
0
Reply
Yes, I actually have an entire design for this! To answer your question though I do not have a modified HousingCarrierHolder since I would need to make one for each gearset which is why I made this gearset available as a separate mod that was integrated with the carrier.
https://makerworld.com/en/models/99992#profileId-106623
Currently you can modify the launcher to use either 1:2 or 1:3 input stage and then the second two stages can be any combination of 1:3, 1:4, 1:5.5 and 1:7. That gives a wide range of gear ratios to experiment with ranging from 1:18 all the way to 1:147
(Edited)1
Reply
ah wait, I can just use the original gears in this section
0
Reply
Print Profile
Toroidal Launcher Gearset - All parts (1:3 ratio)
Made this one with 1:3 ratio gerads, works great
0
Reply
Print Profile
Toroidal Launcher Gearset - All parts (1:3 ratio)
this printed beautifully. just would like some keys for the center included in the print file
0
Reply
Print Profile
Toroidal Launcher Gearset - All parts (1:3 ratio)
very durable and held together
0
Reply
Print Profile
Toroidal Launcher Gearset - All parts (1:3 ratio)
0
Reply
Print Profile
Toroidal Launcher Gearset - All parts (1:3 ratio)
0
Reply
Print Profile
Toroidal Launcher Gearset - All parts (1:3 ratio)
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivativesRelated Models
© 2024 MakerWorld