Master Sword wall mount plate by NoNameToo

NoNameToo

Props & Cosplays>Other Props & Cosplays

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

100% size - PLA parts only - 0.12mm layer, 4 walls, 25% infill

Designer

3 h

2 plates

4.9(8)

100% size - TPU parts only - 0.2mm layer, 2 walls, 15% infill

Designer

29 min

1 plate

Boost

Released

Description

I created this unique wall mount for the famous Master Sword from the Zelda franchise. Complete with the unmissable Triforce. Printable in two-tone or just a single color!

It can easily be attached to any wall or cabinet with some double sided tape. The brackets are at an angle so it automatically slides into the correct position. For those who are able to print in TPU I added rubber protection on top of the brackets so the sword will not be damaged. I doesn't slide into position that well with that addition.

Make sure you use really strong double sided tape!

I used this Master Sword as a reference. I printed this sword in in 60%, 80% and 100% the size. 60% was too brittle, but 80% and 100% came out great. The wall mount plate I created can be printed in 80% and 100% size as well.

https://makerworld.com/en/models/17057#profileId-15831

Happy printing! Please let me know what you think!

Comment & Rating (9)

@AdVanceYourself

Print Profile

100% size - PLA parts only - 0.12mm layer, 4 walls, 25% infill

looks great! Still working on post processing the sword.

@Toprharley

no wonder it doesn't fit my sword right, it's a different sword than the one I printed. doh. looks like I'll have to model my own. printed really well though.