INFO: v2 online to reduce collisions with PTFE Tube while printing bigger Parts!

This is a Anti Glare Shield Upgrade for "THE BEST BAMBULAB X1C AND X1 LIGHT UPGRADE MOD - X1C LOWRIDER COB LED SYSTEM"

I like the Model from @TheLightSpeed but the glare when you look through the top is a little bit anoying so i created this Anti Glare Shield. Its only .6 thick and very fast to print with less Material.
It fits between the "THE BEST BAMBULAB X1C AND X1 LIGHT UPGRADE MOD - X1C LOWRIDER COB LED SYSTEM" and the Top Glas of yout BambuLab Printer X1C/P1S.

4 Parts:
Part 1 Anti Glare Shield Mod.stl
Part 2 Anti Glare Shield Mod.stl
Part 3 Anti Glare Shield Mod.stl
Part 4 Anti Glare Shield Mod.stl

Higly recommended to print v2
4 Parts v2 - smaller Shield but enough against glare:
Part 1 Anti Glare Shield Mod v2.stl
Part 2 Anti Glare Shield Mod v2.stl
Part 3 Anti Glare Shield Mod v2.stl
Part 4 Anti Glare Shield Mod v2.stl



Printing without Support
Ive printed this with the .2 Strength @BBL X1C Profile on my P1S

THE BEST BAMBULAB X1C AND X1 LIGHT UPGRADE MOD - X1C LOWRIDER COB LED SYSTEM from @TheLightSpeed
https://www.printables.com/de/model/425621-the-best-bambulab-x1c-and-x1-light-upgrade-mod-x1c