Print in Place real shooting Plane by RIK_DESIGN

RIK_DESIGN

Toys & Games>Other Toys & Games

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 5 walls, 30% infill

Designer

4.7 h

1 plate

4.0(24)

0.2mm layer, 5 walls, 30% infill

Designer

4.1 h

1 plate

3.8(4)

Boost

188

341

323

166

Released

Description

Print in Place real shooting Crossbow plane with ammo as little planes. Shoots about 8m with PLA and 10m in PETG (more flexible). TIP: Load and unload the tension of the arms a few times to make them easy and supple. Is excellent with Bambu basic PLA, supple and strong. This design was a personal restriction model like print in place, most fit A1 mini, real shooting. I had a lot of fun (and frustration) designing this!

Have fun

RIK

Comment & Rating (32)

@raist2k7

Print Profile

0.2mm layer, 5 walls, 30% infill

Perfect Settings. Printed with A1 / AMS, print was easy. Just changed colors.

The designer has replied

@RIK_DESIGN

Thanks for showing your great make, have fun.

(Edited)

@brightenw8

Print Profile

0.2mm layer, 5 walls, 30% infill

shoots far works good

@catgrenade1

Print Profile

0.2mm layer, 5 walls, 30% infill

excellent print, made a great stocking stuffer

@Gopirque

Print Profile

0.2mm layer, 5 walls, 30% infill

looks really good, but it has to much friction to shoot anything over 2 or 3 meters

The designer has replied

@RIK_DESIGN

I'm sorry it does not work for you. I tested a lot of different PLA and PETG, the most shoot more then 8 meter en more then 10 meter with PETG. If you put the round side of the ammunition to the trigger it shoots even better. Only Elegoo PLA did worse because of more stiffness.

(Edited)

@Rohovich

Print Profile

0.2mm layer, 5 walls, 30% infill

printed well and kids liked it

@ressistantx

Print Profile

0.2mm layer, 5 walls, 30% infill

works fine

@user_2847311812

Print Profile

0.2mm layer, 5 walls, 30% infill

turned out good. dosen't fire very far but it's fun to play with.

@evanfernandez11

Print Profile

0.2mm layer, 5 walls, 30% infill

didn't stick to bed well

@liveyourbestlif

Print Profile

0.2mm layer, 5 walls, 30% infill

This looks awesome, is strong printed with Bambu filament but, difficult for my grandson to figure out how to shoot. Myself included in that honestly.

@MooshiePeas

Print Profile

0.2mm layer, 5 walls, 30% infill

failed 5 times and I couldn’t get it to work

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Slim Wallet (V4) - print in place

MakerVerse Designs

356

923

Print Profile(2)

Description

Comment & Rating (32)

License

Related Models

Slim Wallet (V4) - print in place

Fidget Knob {PRINT IN PLACE}

Crystal articulated snake 114 cm long

Flexi Articulated Snake 114 cm long