Flexi Leaf Dragon Mark-Ⅱ Set(Print-in-place)

[Update]
---2024/02/07---
A model with a straight type is now available.
---2024/03/18---
Fixed an omission of paint in the multicolor file for wide type.

This is an upgraded version of the Flexi Leaf Dragon I published on Thingiverse.
https://www.thingiverse.com/thing:6446798
The following details have been added compared to the free version.
・Scales added to the head and limbs
・Newly sculpted large leaf scales on the back
・Stripes have been added to the leaves on the tail and mane

This model includes the following digital content
01: STL - Leaf Dragon(Long Size)
02: STL - Leaf Dragon(Medium Size)
03: 3mf (Bambu)- Leaf Dragon(Long Size)
04: 3mf (Bambu)- Leaf Dragon(Medium Size)
05: STL - Dragon Stand
06: 3mf (Prusa)- Leaf Dragon(Long Size)
07: 3mf (Prusa)- Leaf Dragon(Medium Size)

03 and 04 are 3mf files for multi-color that are compatible with Bambu Studio, and 06 and 07 are 3mf files for Prusa Slicer. If you want to do multi-color prints, please use these files.
There are Three types of models, square type (170mmx160mm), wide type (240mmx125mm), and straight type, which can be used according to the bed size of the 3D printer. If your 3D printer has a bed size of 250mmx250mm or larger, such as "Bambu Lab P1P", you can make up to Two dragons at once. (using wide type)
This set also includes a medium size model (ONLY SQUARE TYPE) as an extra. Please choose your favorite size and 3D print it. Print in Place with no supports. No assembly required.

Only the stand on which the dragon can be displayed needs to be assembled. Please refer to the second GIF and the 7th photo when assembling the 3d printed. Stand #3 should be oriented with the numbers to the right and stand #4 should be oriented with the numbers toward the front.

Please take pictures of your Flexi and share them with us!

💰Commercial Use💰
This model is granted "CULTS CU-ND - COMMERCIAL USE - NO DERIVATIVE" and may be used commercially within the terms of use.
Ex) Sell 3D printed Flexi on Etsy, flea markets, etc.
For more information, please see the terms and conditions below.
https://cults3d.com/en/licenses#cults_cu_nd
⚠Attention⚠
Only this model can be used for commercial purposes; the free version of the model cannot be used for commercial purposes.
(Because free version is already licensed under the "CC BY-NC-ND 4.0" or "CC BY-NC-SA 4.0" non-commercial use license. Also, selling a free version that cannot be used for commercial purposes may cause customers to misunderstand that you are selling it without permission.)

💷Support💷
If you would like to chip in or support us, we would be happy to purchase a paid model for sale on Cults.
💷Cults↓
https://cults3d.com/en/users/3dflexseeds/creations

⚠Warning⚠
Be careful in environments with young children and pets!
This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!
Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.

Store them in an appropriate place.
After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.

Rafts:No
Supports:No
Layer Height: 0.1-0.3 mm
Infill:15-20%
Filament material: PLA
{Recommend}
Layer Height: 0.2mm
Print Speed: 60mm/s
Outer Wall Speed: 20mm/s
Z Seam Alignment: Sharpest Corner
Z Seam Corner Preference: Hide Seam