Battery Mounts for securing a CHINS LiFePO4 12V 20AH Lithium Battery vertically. I originally made brackets to hold the battery on its side, but also needed to hold the battery vertically and that's where this model came from. I used 2 of the horizontal brackets connected with a gusseted shelf to take the weight and support the battery. The top is secured with 2 of the original brackets. The brackets have a 2mm clearance on the battery to leave room for a bit of foam tape (affiliate link). The foam I used was about 6mm, this gave good compression when screwed down and keeps the battery secure. 6 holes sized for #8 pan head screws in each bracket. This was printed in eSun PLA + vertically with support