My Bambu X1C vibrates quite a lot which means sometimes the bucket is being pushed away. When that happens I find filament everywhere on the table. That's the reason why I made this Remix.

Seeing that I already had a functioning bucket I didn't want to print another one, so I made this Add On / upgrade to add magnets to existing ones.

The files have been made with Fusion360.

----------------------------------------------------------------------------------------------------------------

If you want to help me out a bit and see some stuff I made, work in progress, or models before they will be here consider liking and following my Facebook page, thank you very much - it means a lot to me! :)

----------------------------------------------------------------------------------------------------------------

• Print with:
  • PLA
  • 3 wall loops
  • 15% infill
  • no supports are needed
  • no brim needed
  • BambuLab_Bucket_AddOn_Short
    • The nut holes should be facing upwards
  • BambuLab_Bucket_AddOn_Long
    • The nut holes should be facing towards the bed

• Additional stuff:
  • Just glue in your magnets into the cutouts.
    • Different magnet sizes are available. If your's is missing just comment.
  • For assembly refer to the pictures attached.
    • BambuLab_Bucket_AddOn_Short
      • Use the short part as a ruler outside to make drilling easier
      • The little overhang is for easy of drilling
    • BambuLab_Bucket_AddOn_Long
      • Place on even ground
      • The face with the cutouts should be flush with the face of the bucket
      • Drill the middle hole first
      • Secure it with the screw
      • Drill the two outer holes

• Parts:
  • BambuLab_Bucket_AddOn_Short_d%x%mm
    • as provided
  • BambuLab_Bucket_AddOn_Long_d%x%mm
    • as provided
  • M3x12mm Flathead or count screw
    • 5 pieces
    • 12mm long
  • M3 nut
    • 5 pieces

• Magnets:
  • I have a bunch of those d5x1mm magnets. Depending on the size of the hole i just put the necessary amount in, that ways the magnets are usable more flexible.
  • Here are some d5x5 magnets.
  • Those are my Amazon ref-links, won't make a difference for you, but helps me :)

• Updates:
  • none so far

----------------------------------------------------------------------------------------------------------------

I'm looking forward to your comments and makes. :)