This is my first self made Hueforge Design. This majestic lion comes out absolutely fantastic and can be graded in different colors for different styles. Instead of red you can try a light blue, to come closer to the color of the space, but I went with Yellow and Red. The Filamets I used are not the ones from the description below. I used black Sunlu PLA, white Jayo PLA and matte PLA from Overture for yellow and red.

Printed on a BAMBU P1S with AMS.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PETG JAYO Black Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 5
    PLA PolyLite Lemon Yellow Transmission Distance: 6.5
    PETG JAYO White Transmission Distance: 6

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #11 (0.96mm) swap to Lemon Yellow
    At layer #15 (1.28mm) swap to White for the rest.