Air Filter "hepa" & Carbon Refillable Replacement for Bambulab X1 / P1S / Upgraded P1P Remixed by eds_3d_shop

Remixed by

eds_3d_shop

3D Printer>3D Printer Accessories

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 12 walls, 50% infill

Designer

1.3 h

1 plate

4.9(63)

0.2mm layer, 5 walls, 50% infill

Designer

25 min

1 plate

4.9(51)

"Mice Ears"-Version 0.2mm layer, 12 walls, 50% infill

Designer

1.3 h

1 plate

4.6(8)

Boost

205

488

212

645

475

Released

Description

Working on such designs takes a lot of time and if you like my work and want to support me - please print my “Designer” printprofiles! It will help me to design more! Thank you in advance!🙏

It was time to replace my activated carbon filter again and I didn't feel like ordering and waiting again... I found a really nice model/remix for refillable charcoal /activated carbon filter for BambuLab printers at printables (Thanks to Skywarrant! :-) That suited me almost perfectly… But I had to change a few things so that I'm completely satisfied with it! :-)
And I wanted to share the remixed version with you!

Here in video, I show how to change the filter material (activated carbon and HEPA!) with the help of this cool box!

https://www.instagram.com/p/CyY9BXIr_8r/

My changes:

The lid has got 2 slits to be able to open it more comfortably - take a look at the pictures!
The tab on the lid is now more solid, so it can't break now
scaled down to 98% for better, easy fit.
main box got carbon logo and lettering ;-)
extra variant of main box stl with tabs for better adhesion (take this for ABS/ASA! ;-), just cut off these small tabs with the cutter after printing.

Print Instructions:

Quality:

layer height: 0.2mm

Strength:

only one wall on top surfaces: off
only one wall on first layer: off
wall loops: 5 (only for “Activated_Carbon_Filter_Bottom_with_Tabs.stl”: 9 Walls!)
top shell layers: 0
bottom shell layers: 0
sparce infill density: 30% - 50% (im prefer 50% - see on pictures)
sparce infill pattern: Triangles
Infill/wall overlap: 20%
Infill combination: off

Speed:

first layer: 10-20mm/s
first layer infill: 10-20mm/s

Filament: take better ASA/ABS or at least PETG - for better temperature resistance!

Good and safe source for activated carbon (or just search for “Nevermore Carbon”): https://github.com/nevermore3d/Nevermore_Micro

— ! —

Thanks for downloading, rating in advance and please don't forget to like this model! ;-)

Take a look at my another very helpful designs for X1/P1P/P1S/A1/A1mini:

🔗**Eds_3D_Shop designs on MakerWorld** 🔗

If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! https://linktr.ee/eds_3d_shop

Thank you for your support and.. happy printing!

Ed ;-)

Comment & Rating (212)

@markobil

super sache, danke dir. kann irgend wie nicht Bewerten?! aber auf jedenfall ⭐⭐⭐⭐⭐ von mir. wie sieht es gewerblich aus? freunde von mir haben schon gefragt, ob ich denen eins verkaufen würde.

The designer has replied

@eds_3d_shop

Hallo Marko! Danke Dir für super Feedback und Make! Das freut mich sehr, das Dir das Design so gut gefällt! 😍👍 Zu Deiner Frage - dieses Modell ist ein Remix von dem Design (siehe Lizenz in Beschreibung) , wo keine kommerzielle Nutzung erlaubt ist, somit darf ich das leider auch nicht tun. Beste Grüße, Ed

@markobil

Replying to @eds_3d_shop :

Dieses Model ist Perfekt geworden, das Orangene oben, sind die Deckel kleiner geworden, weis nicht warum :D ... also neu Drucken. Hab mir jetzt Hepa Filter sowie Kokos Kohle gekauft, damit ich meinen Vorrat auffüllen kann ;). Andernfalls, kann ich ja schön, die Hepa Filter sowie die Kokos Kohle abfüllen, für die Menge die ein Filter braucht und dies dann Verkaufen, auch eine Option :)

@user_135681931

Print Profile

0.2mm layer, 12 walls, 50% infill

printed great! Thanks for the great print!

The designer has replied

@eds_3d_shop

I’m really happy to hear and see that! 🤩👍Thank you for awesome feedback and make! 🙏😍👍 It will greatly support my work on such designs if you will boost this design! (Klick on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@DarkArtsLab

Prints easily in ASA, fits perfectly. Well Done!

The designer has replied

@eds_3d_shop

@markobil

Print Profile

0.2mm layer, 12 walls, 50% infill

super dinger 🤙 mit PETG gedruckt, die nächsten dann mit ASA. wie siehts aus, darf ich die verkaufen fixfertig? mit hepa filter und kohlefaser?! grüsse bambulab.org 👍

(Edited)

The designer has replied

@eds_3d_shop

Hallo Marko! Danke Dir für super Feedback! Das freut mich sehr, das Dir das Design so gut gefällt! 😍👍 Zu Deiner Frage - dieses Modell ist ein Remix von dem Design (siehe Lizenz in Beschreibung) , wo keine kommerzielle Nutzung erlaubt ist, somit darf ich das leider auch nicht tun. Beste Grüße, Ed

(Edited)

@Asakiro

Boosted

Print Profile

0.2mm layer, 12 walls, 50% infill

ABS

The designer has replied

@eds_3d_shop

Dein Make sieht sehr schön und sauber aus! 🤩👍 Danke Dir dafür und für die tolle Bewertung! 🙏😍👍

@user_3765124684

Print Profile

"Mice Ears"-Version 0.2mm layer, 12 walls, 50% infill

Came out perfect.

The designer has replied

@eds_3d_shop

Thank you for awesome rating and make! 🙏😍👍 It will greatly support my work on such designs if you will boost this design! (Klick on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@pa.pa.

Perfect print and very friendly helpful maker:) (Filled with Nevermore Carbon)

The designer has replied

@eds_3d_shop

I’m happy to hear that! 🤩👍Thank you for awesome make and feedback! 🙏😍👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@iamwhoiam

Print Profile

"Mice Ears"-Version 0.2mm layer, 12 walls, 50% infill

Cool design. But the dimensions of raw file is incorrect, not match with the 3mf.

(Edited)

The designer has replied

@eds_3d_shop

Thank you for great rating! 🙏😍👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@mjoshd

Print Profile

0.2mm layer, 5 walls, 50% infill

Thanks for sharing this excellent profile!! Printed perfectly 🙂

The designer has replied

@eds_3d_shop

It looks really perfect! 😍👍 Thank you for awesome make, feedback and rating ! 🙏😍👍 Happy printing and feel free to check my another BambuLab designs! 🖐️😃

@Unforgivenll

Print Profile

0.2mm layer, 12 walls, 50% infill

Bambu Lab ASA Black. Great model, thank you!

The designer has replied

@eds_3d_shop

Thank you for great rating and awesome make! 🙏😍👍

This remix is based on

Activated Carbon Filter Replacement

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.