Here's an extra large picture Deadpool. Its the largest size Hueforge will allow 450x302mm split into 4 sections. Heads up the slicing takes ages for each plate.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

I used Kingroon PLA Black, yellow, red and white but im sure you can use any basic PLA brand

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Lava Red
At layer #12 (1.04mm) swap to Pastel Banana
At layer #17 (1.44mm) swap to White for the rest.