Another model of Psyduck from printedobsession brought to Maker World.
Coloured to be printed with AMS. I recommend to use one of my print profiles for best result.
Three print profiles to choose from, all with 0.4 nozzle:
- 100% scale @ 0.2 layer height, 0.4 nozzle
- Approximate dimensions 116 x 116 x 126 mm
- Filament change times: 513
- Time to print: 17h 40min
- Filament use:
- Yellow: 54 m / 164 g
- Black: 2.3 m / 7 g
- White: 12 m / 38 g
- Bone white: 35 m / 105 g
- 60% scale @ 0.2 layer height 0.4 nozzle (The one in the photos)
- Approximate dimensions 70 x 70 x 76 mm
- Filament change times: 515
- Time to print: 10h 11min
- Filament use:
- Yellow: 25 m / 75 g
- Black: 1.3 m / 4 g
- White: 7 m / 22 g
- Bone white: 19 m / 57 g
- 60% scale @ 0.12 layer height 0.4 nozzle
- Approximate dimensions 70 x 70 x 76 mm
- Filament change times: 511
- Time to print: 18h 39min
- Filament use:
- Yellow: 36 m / 110 g
- Black: 2 m / 6 g
- White: 12 m / 36 g
- Bone white: 30 m / 90 g
You can reduce some filament and time by combining it with AMS Purge Calibration from Ciuf-Ciuf. As this was a test print, the print time and filament usage on photos are without using calibration.