Sir Pepe the Frog Paintings in HueForge

************************************** HueForge **************************************

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Basic Sample Green Transmission Distance: 8
PETG JAYO White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Dark Blue
At layer #5 (0.48mm) swap to Sample Green
At layer #12 (1.04mm) swap to White for the rest.