Honkai Star Rail SEALs ("Director's Cut")

I liked these Juan Mei cake kitties from XSR so much that I wanted one for my house, hah. I made a simple model of these kitties, printed and painted some of them already, I like it, although they turned out a bit more square. However, I've been told they even seem cuter that way. The kitties were printed with white plastic, then painted with acrylic paint (water resistant).

There are 3 versions of the kitties in the files:

• "kitty Kafka from khonkai.stl" - the model of the actual kitty - "Kitty in glasses" (there are glasses on the house, she is no different from the kitty from the file "kotiki from khonkai updated.stl")

• "kitties from honkai updated.stl" - standard template for all kitties from the game, except Trash Gingerbreadman

• "kitties from honkai Trash Cake.stl" - model with a small recess at the top of the house, there are no more differences from the standard models.

There are also files with separate models of the standard cat and the standard house.

I printed these kitties with a magnification of about 500%, ie, set the y size 50mm, you can do as you like. Personally I think 5cm wide/long (that's the dimensions of the house) is enough.

Supports are needed, otherwise the roof of the hut will break.

Depending on the print settings, it can take up to 3 hours to print.

The layer height is 0.2mm

10-20% fill rate

The adhesion I chose is "substrate", it prints for about 3 hours with it.

After printing, the kitty model can be sanded a bit with sandpaper if necessary, but I didn't do it before painting, it didn't affect the quality.