I designed this honeycomb/hexagon monitor stand/riser for my 23.8" monitor to raise it up a bit to match the height of my 27" monitor. The size of this stand is 240X232X70mm. I also created a pen holder and several different size of joints for mounting/supporting other items as can be seen in the uploaded pics. The step files for these models were uploaded, so feel free to remix this model to meet your own needs.

I've printed the stand/riser vertically to have a smoother finish in the bend area at the sacrifice of strength. The following material and print settings were tested with my P1S printer and the fnished print works well with my 23.8" monitor.

Material: Bambu PLA (PETG is suggested but not required)

Object orientation: Vertical (better finish but less strength)

Print settings: Default 0.2mm Standard @BBL X1C except for adding the outer brim (8mm)

Important Increase the bed temperature a bit, use outer brim width of 8mm, and use glue(optional if raised bed temp and added brim width) for better adheresion when printing the monitor stand vertically.