A1 Mini Top Filament holder with Handle
Copyright Claim
A1 Mini Top Filament holder with Handle
Boost
23
36
16
Print Profile(1)
0.16mm layer, 3 walls, 60% infill
Designer
6.9 h
1 plate
Boost
23
36
16
0
84
34
Released
Description
A1 Mini Top Filament holder with handle.
easy reaload , less PTFE tube, nicer handle , shorter drive for filament.
Fit the handle easy.
Comment & Rating (16)
All
Very nice solution and great way to keep the foot print down while avoiding a lot of weight above the printer!
Edit: just printed. Had to orient the handle to print on its side to have strength. It was a bit hard to screw into the base because of the support material, so I had to remove the mangled threads but was able to force the screw into the hole. Seems to hold just fine and saves a couple inches from the external spool holder.
Still need to print the securing pegs and re-route the tube and power cable.
(Edited)
The designer has replied
1
Reply
Nice Job, can i use on of your pictures ?
1
Reply
Replying to @Landvoigt
yes please feel free!
1
Reply
Replying to @jordan7831
Tanks !
1
Reply
Hey there, I made a slight tweak to have the bend at a 90 degree angle but Im not able to upload due to the license you have. Are you able to update so I can add as a remix of your work?
The designer has replied
0
Reply
feel free. the license is changged for you .
1
Reply
Replying to @Landvoigt
Thanks, it didnt seem to update though. If you'd like, I can upload the model and in the description I can credit you with a link to your model.
Just let me know, I want to ensure you receive the credit as due. Thank you!
0
Reply
@Landvoigt can i print full z height with this?
The designer has replied
0
Reply
you have to try . I can’t say this at the moment
0
Reply
Print Profile
0.16mm layer, 3 walls, 60% infill
Can you make parallel with printer and not on an angle?
0
Reply
hi there, I dont want to steal any thunder from the creator, but i made a remix (with permission) that does what you are describing.
0
Reply
Hi there, Im a total newb at 3d design but I was playing around in tinkercad and made a slight variation to have the spool be more in line with the build plate.
https://www.tinkercad.com/things/lki5cEf9CGv-spool-holder?sharecode=fqTCfzVN2Ed2F7W5YNyUXoJ8yB7_oLTN-QUr82iyP6o
1
Reply
这个角度不行新开的 灯丝打印会跑出来，求优化
0
Reply
Print Profile
0.16mm layer, 3 walls, 60% infill
0
Reply
Print Profile
0.16mm layer, 3 walls, 60% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
© 2024 MakerWorld