Stubby Ratchet Palm Driver - Print in Place - 6.35mm 1/4in bits by NUKDDD

NUKDDD

Tools>Hand Tools

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

single color 0.2mm layer, 3 walls, 10% infill

Designer

58 min

1 plate

4.9(9)

3 colors palm driver 0.2mm layer, 3 walls, 15% infill

Designer

1.1 h

1 plate

5.0(1)

Multi-colour using AMS, for A1 mini, 0.2mm layer, 3 walls, 10% infill

1.2 h

1 plate

4.5(2)

Multi-colour using PAUSE, for all printers, 0.2mm layer, 3 walls, 10% infill

1.1 h

1 plate

5.0(1)

Boost

111

Released

Description

A simple yet useful tool in any tool box, this little palm driver accepts 1/4in or 6.35mm bits, it's 2 sided for tightening and loosening, just follow the arrows.

The pressure from your palm will align and lock the ratchet gears to tighten or loosen the screws.

Print in place, no supports. Print in one color or 3 of your favorites with the 2 print profiles.

Alse there's option to place two 6x2 round magnets if you pause the print at layer 67, use a bit of glue because the nozzle will pick them up if they're loose in the slot. Magnet isn't need as the socket is a tight fit, you may do some xy compensation to get it right with your filament.

I used Tough PLA and haven't had an issue with the task I completed with this.

Comment & Rating (16)

@jomega14

Boosted

Great model! Used it for fixing my refrigerator.

The designer has replied

@NUKDDD

oh nice! thank you 😊

@johndennis

Print X1C using single colour supplied profile and Kiwifil Pla Pro. Excellent result and works well. Precision snug fit for tools. Thank you for sharing.

@grahamrust

Print Profile

single color 0.2mm layer, 3 walls, 10% infill

@jomega14

Boosted

Print Profile

single color 0.2mm layer, 3 walls, 10% infill

great model! works perfect.

@GegenwarthsBast

Print Profile

single color 0.2mm layer, 3 walls, 10% infill

works like it should be

@Babohu

Print Profile

single color 0.2mm layer, 3 walls, 10% infill

sehr praktisch

@johndennis

Print Profile

single color 0.2mm layer, 3 walls, 10% infill

easy quality print using pla pro with excellent results. have also printed in petg carbon fibre with excellent results. thank you to designer for quality product.

@shotgunb

Print Profile

Multi-colour using PAUSE, for all printers, 0.2mm layer, 3 walls, 10% infill

Very cool design with print-in-place. Works great. Bit hole is a bit tight but better than too loose

@BenBen96

Print Profile

Multi-colour using AMS, for A1 mini, 0.2mm layer, 3 walls, 10% infill

@drew_204

Print Profile

single color 0.2mm layer, 3 walls, 10% infill

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.