After Homer… it's turn of Lisa!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Geetech Black Transmission Distance: 0.5
PLA+ Sunlu Red Transmission Distance: 6
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA Geetech White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #21 (1.76mm) swap to White for the rest.