Another Skadis Plier Holder- 4 Wiha plier possible by Jodadoo

Jodadoo

Tools>Organizers

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 25% infill

Designer

1.6 h

1 plate

4.9(24)

0.2mm layer, 3 walls, 20% infill

Designer

41 min

1 plate

5.0(4)

Boost

172

284

210

Released

Description

Update April '24

Added a version with just on hole

____________________________________________________

I could not find a plier holder, suitable for my 4 wiha pliers. So I designed one by myself.

I printed it with a modifier to raise the infill in the area of the hooks to 100%. The rest I've printed with 75%. Works good for me!

skadis

plier

wiha

Comment & Rating (34)

@ossboss

Print Profile

0.2mm layer, 3 walls, 25% infill

very usefull , but my Print was Not 100 succesfull. spaghetti Monster

@Hyper

I guess you used PETG because you have warping problems at your edge. As a result, the material came loose from the bed and caused spaghetti monster. Google for PETG Warping Issue and how to fix it. I had the same problem and it did help to increase bed temp at 80°C and less cooling.

@ossboss

Replying to @Hyper :

no it was Pla from jayo with Standard Bambu settings. Other stl before worked good Same settings dont know what went wrong here

@HoLiTio

Print Profile

0.2mm layer, 3 walls, 25% infill

Good print

@sykprint

Print Profile

0.2mm layer, 3 walls, 20% infill

I liked.

(Edited)

@hansdiegans

Boosted

Print Profile

0.2mm layer, 3 walls, 25% infill

Passt perfekt für 4 zangen

(Edited)

@ossboss

my Result Spaghetti Monster dont know what Went wrong

@finniminni

Boosted

Print Profile

0.2mm layer, 3 walls, 25% infill

Nice :)

@urbanovipeter

Boosted

Print Profile

0.2mm layer, 3 walls, 20% infill

@karl

Print Profile

0.2mm layer, 3 walls, 25% infill

Printed nicely but too big for my pliers. I keep it in my drawers in case I get bigger ones and I've remixed it for small pliers. Cheers!

The designer has replied

@Jodadoo

just have a look at my second print profile. :)

@karl

Replying to @Jodadoo :

Hi! Yes, your second profile is smaller but it's the same depth as the large one, isn't it? At least, that's what I thought from the pictures. And if I'm correct, that would still be too deep for some of my small pliers, especially the small cutting one that rotates and fall through the holder. Any way, I may print it soon as well when I'll be tidying the bigger pliers I have somewhere, but first I need to find them back x).

@user_321158452

Print Profile

0.2mm layer, 3 walls, 25% infill

Very stable model. A little too wide for my plier set. Would be nice to make it parametric to reduce the depth of this. I guess we can always scale before printing.

The designer has replied

@Jodadoo

hi, parametric / scaling is not that easy cause of the given Skadis hook pattern. :(

@user_2697567177

Print Profile

0.2mm layer, 3 walls, 20% infill

sieht sehr gut aus und passt in mein Skadis PEG Board :)