There are many good solutions for the A1 and the A1 mini waste issue, yet none felt complete… so here is a complete waste management system for the A1 or A1 Mini.

This includes 8 separate models

Base plate - to act as mount for the waste bin to ensure it does not walk away when your printer gets moving. attach with whatever solution works best for you. Magnetic tape, command strips, double sided tape, glue… The bin slide in securly but lifts off easly.

Bin - It collects the poo… (Gate Highly Recommended) includes handle and removable gate for easier dumping. use the gate for stuck on bits and never touch poo again. 

Gate - slides into the front of the bin. has an arrow to help align the bin center to the purge arm. Designed to fit snugly but have some tolerance for minor errors. 

Back - For setups requiring extra Hight, clips on to the handle for easy install or removal. 

Scoop - For setups needing the bin to be a bit further away, clips on to the handle for easy install or removal.

Deflector - slides onto purge arm to keep things from flying too far.

Scraper - purge lines are waste too and having a scraper convenient is always great.

Hanger - Clips onto the side of the bin, keeps the scraper handy.

Print what you need based on your setup, Happy Printing