Infinity Spool Holders is a modular storage and management system for spools of wire, solder, ribbon, and more!

• Fully compatible with Infinity Bins!

Features:

• Infinite expansion vertically and horizontally
• Removable spool trays for portability
• Docking bins for storage
• Label insert to easily identify the contents of each bin (optional)
• Bottom TPU pad for slip reduction on smooth surfaces (optional, must print in TPU or similar material)
• Parametric spool core model provided

Use Cases:

• Spool storage and management (up to 70mm diameter)
• Office, home desktop
• Workshop workbench
• Crafting table
• Maker space

Notes:

• Enable support on the Spool Tray model for a flush bottom edge
• It's easiest to expand the bins horizontally from the right-hand side because you and slide the next bin into place top-down through the dovetail channel.
• Shown as printed at 0.2mm layer height.
• Bin dimensions: 81.9 x 85 x 85mm
• Label blank dimensions: 73.6 x 12.4 x 1mm

Parametric Spool Core Instructions:

• Open infinity_spool_core_parametric.f3d with Autodesk Fusion
• Modify > Change Parameters
• core_diameter is the measurement of the inner core of your spool
• core_length supports a maximum length of 64mm

Edit Label in Bambu Studio:

• Open infinity_bin_label_bambu_studio.3mf file
• Switch Process to Objects
• Right-click Label Text in the object list
• Select Edit Text
• Use the text dialog to modify the text
• Right-click Label Text in the object list
• Select Center