180x130
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Wanhao noir Transmission Distance: 5
PLA Wanhao rouge Transmission Distance: 5
PLA Wanhao Jaune Transmission Distance: 5
PLA Wanhao White Transmission Distance: 5
Swap Instructions:
Start with noir
At layer #7 (0.64mm) swap to rouge
At layer #12 (1.04mm) swap to Jaune
At layer #18 (1.52mm) swap to White for the rest.