P1P/S Panda Touch Display Holder by Thyristor

Thyristor

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

P1P/S Panda Touch Display Holder - 0.4 nozzle, 0.2mm layer, 3 walls, 15% infill

Designer

59 min

1 plate

4.9(39)

P1P ARC Panda Touch Display Holder - 0.4 nozzle, 0.2mm layer, 3 walls, 15% infill

Designer

58 min

1 plate

4.7(6)

Boost

114

280

234

Released

Description

Simple and easy P1P/S Panda Touch Display Holder. This piece easily slides onto the original display, allowing the Panda Touch to sit next to it.

Featuring two attachment points, it conveniently secures the USB cable, providing a neat cable management solution. The Panda Touch base is secured to the holder using the screws provided with the Panda Touch.

In summary, the Panda Touch Display Holder is a simple and practical addition, facilitating a tidy setup without any frills.

Updates

24/02/15 A tighter fit

The tolerances and geometry of the P1 display part have been adjusted - it should now fit a bit better.

24/02/08 ARC version

P1P ARC enclosure compatible version added. Should create enough air so that the door of the ARC enclosure can be opened and/or closed.

Comment & Rating (66)

@MetMan

schade das es mit dem Arc Gehäuse nicht funktioniert ☹️ villeicht könntest du das rechte Teil ein wenig höher konstruieren?! sonst ist die Konstruktion perfekt !

The designer has replied

@Thyristor

Ah - da geht die Tür nicht dran vorbei - wie viel höher müsste das ganze?

@MetMan

1,5-2 cm bei 1,5cm wäre es ganz knapp ..

@Thyristor

Ich werde mich heute Abend da ransetzen - sitzt der Top Riser viel weiter vorne?

@MK3DPrint

Print Profile

P1P/S Panda Touch Display Holder - 0.4 nozzle, 0.2mm layer, 3 walls, 15% infill

No problems with printing. Fits well, could be a little tighter on the original display but all good. Thanks for the design.

The designer has replied

@BuildMyDream

P1S ——Whee to buy on this screen? Thank you.

(Edited)

@Thyristor

Replying to @BuildMyDream :

It's the Panda Touch from BigTreeTech/Biqu - you can find it on their website or on AliExpress

@dezpool

Print Profile

P1P/S Panda Touch Display Holder - 0.4 nozzle, 0.2mm layer, 3 walls, 15% infill

I was originally a little worried about the strength of this but it turned out I was worried for nothing. Printed fast and strong. It works with the AMS Riser V2 by maCyo42. Great print.

@Croak_

Print Profile

P1P/S Panda Touch Display Holder - 0.4 nozzle, 0.2mm layer, 3 walls, 15% infill

Nice solution. Initially went with your design since I could print it at 1AM and didn't need to order any screws or magnets and/or tear down the Panda Touch. Took me a second to figure out the cable management, but I got it figured out. Good job amigo, good job.

@harcrafri94

Boosted

Print Profile

P1P/S Panda Touch Display Holder - 0.4 nozzle, 0.2mm layer, 3 walls, 15% infill

simple rapide et efficace ❤️

@Mike_Ranstadt

Print Profile

P1P/S Panda Touch Display Holder - 0.4 nozzle, 0.2mm layer, 3 walls, 15% infill

ich bin begeistert 🤩

@mansch56

perfekt! vielen Dank👍👍👍

@AniMeiGrrl

Really liked this - simple and functional. Note for anyone using - run the cable and clip into the printed piece first - then secure the charging plate. It makes this super simple.

(Edited)

@mambone

Print Profile

P1P ARC Panda Touch Display Holder - 0.4 nozzle, 0.2mm layer, 3 walls, 15% infill

Schöner Ausdruck, passt perfekt, ich habe Löcher für die Schrauben erweitert und Gewindehülsen eingeschmolzen.

@motorola2001

Boosted

Print Profile

P1P/S Panda Touch Display Holder - 0.4 nozzle, 0.2mm layer, 3 walls, 15% infill

I can't write a review on this part yet, I don't have the printer or display at home yet. Ordered both, waiting for delivery. My review would not be objective. Seamless printing.

(Edited)