print as expected, good vase mode, I used a fluorescent PLA

ADAGIO 3D

0.2mm layer, 1 walls, 0% infill

daultoninw

I have two fluo PLA: ICE filament that has fluo speckles in it and Overture that is more homogeneous with no visible speckles, I don't remember now (hahah sorry) but looking at it I think is the first one.

tempImage5ToVVF_7e9bb0c5-1f79-4620-81cb-1ecb4ed9ddfb.jpg

tempImage5ToVVF_7e9bb0c5-1f79-4620-81cb-1ecb4ed9ddfb.webp

plate_1.webp

plate_1.png

<ul><li>Print in vase mode. </li><li>Set perimeter mode to arachne. </li><li>TURN OFF “Slow down for overhangs” or “dynamic overhang speed.” If you leave that setting on, it will leave these splotches underneath the lumps. Trust me, it works. </li><li>Set bottom surface pattern to concentric. </li><li>Other than the above mentioned settings, leave everything else on the stock 0.2mm layer profile. </li></ul>

<p>This is a lamp shade made for HendricksDesign's Cleo Lamp on Thangs (https://thangs.com/designer/HendricksDesign/3d-model/Cleo%20Lamp-963728). THIS IS JUST THE LAMP SHADE. The rest of the lamp design files are in the link. Additional print instruction are in the print profile. </p>

Print Profile(1)

Description

Comment & Rating (3)

License

Related Models

Heart Shape Plant pot and Planter - Vase mode

Parametric Voronoi Sphere Vase - Vase mode design

Box vase mode

Pineapple Crown Plant pot and Planter - Vase mode

Lumpy Shade Vase Mode