MT9 MT-9,mods,CyberMT9,Cyber Toy Shooter mods by BadBear

BadBear

Props & Cosplays>Replica Weapon

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 4 walls, 25% infill

Designer

11.1 h

2 plates

4.6(21)

[A1 mini]0.2mm layer, 4 walls, 25% infill

13.5 h

2 plates

5.0(1)

Boost

333

757

1.5 k

280

Released

Description

原作者为无明业火_BLAZERS，想传二次创作但是发现作者没有开启，但是又想分享出来，先发出来hhh，如有不合适马上删除~

做了一些赛博化的外观配件，对原模型有修改的零件主要为枪主体握柄安装位置。所有安装方法按照原作者的即可。

直接点击下载按钮为CyberMT9全部模型，单独下载外观套件点击原始模型文件按钮。

原枪MT-9的五金包/零件包在拓竹商城销售，有兴趣的朋友可以去购买。我的是买打印机送盲盒给的。

英文部分为微软大模型翻译，请外国友人见谅。

The English part is translated by Microsoft’s GPT, if can‘t quite understand, forgive me, friends.

The original author is 无明业火_BLAZERS. I wanted to share a secondary creation, but found that the author did not enable it. However, I still wanted to share it, so I posted it first. If it’s inappropriate, I will delete it immediately.

Click the download button to download all models, or click the raw model files button to download the mods separately.

I made some cybernetic mods for the original model. The main parts modified from the original model are the installation positions of the gun body handle. The installation method can be followed according to the original author.

The hardware package is sold in the Bambu Lab store. Friends who are interested can go and buy it. Mine was given as a blind box when I bought the printer.

Comment & Rating (57)

@ShearLab

Print Profile

0.2mm layer, 4 walls, 25% infill

Very good print and great design. It is missing the magazine stopper but you can just print that from the original profile.

The designer has replied

@badbear

I checked and found that it was indeed missing, thanks for the reminder. I have updated the 3mf file to supplement it.

(Edited)

@sebcsi85

Replying to @badbear :

bonjour as tu un plan pour l'assemblage. merci d'avance

@user_3298605529

请问这个枪能用A1 mini打印机打印吗？自行缩小尺寸后，零件包还能用吗？

The designer has replied

@badbear

理论讲A1mini可以打，但是我没有所以没试过：：：，原枪在原作者那边有A1mini的配置，看作者的视频好像也是A1打印的，我的几个外观件就需要自己试一下了。缩小尺寸零件包肯定用不了了

@user_188305410

原枪可以用mini打,缩小了不能用零件包.

@wangjian1171

我已经试过了，分成三盘就可以了，外观件没有超尺寸，就是零件包没到还没组装

@user_2887045106

我是用A1mini 耗材是PETG打的竹子初始参数就热床设置80° 这天气设置70°打枪口可能会沾不住打完后后面那块需要拿锉刀稍微打磨一下保证能正常发射

@Qmax3D

It’s work well. thanks

@marcusmxk

Print Profile

0.2mm layer, 4 walls, 25% infill

Printed well, some fits were a little tight and need some hammering. Drill out pin holes with a 2mm bit before inserting to make it easier.

@user_329080769

Hello, which hardware package from Bambu Lab (001-007) should be for the gun?

The designer has replied

@badbear

004

@user_329080769

Replying to @badbear :

Thank you, unfortunately the #004 does not exist in EU. Pity..

@badbear

Replying to @user_329080769 :

You can follow the list to try buying hardware Hardware Kit： 1.pivot pin：D2xL14*1，D2xL18*9，D2xL25*1 2.compression spring：0.3x3xL10 *2，0.3x6xL80 *1，0.5x5xL25 *1，0.7x12xL70 *1 3.torsion spring：0.4x4(120°，cylindernumber 6） *1，1x5(120°，cylindernumber 3） *1 4.screw：M5x12(thin cap) *3

@andi.ponsold

Print Profile

0.2mm layer, 4 walls, 25% infill

Leider ist das Hardware Kit nicht mehr zubekommen, daher ist das Modell nicht zusammenzustellen.

The designer has replied

@badbear

I‘m so sorry about :(

@debugger

Die Teile sind alle so erhältlich. Für wenig Geld hat man 10 Sets... 2 Federn sind kompliziert, nimmt man einfach lange und zerschneidet diese. Viel Spaß!

(Edited)