For the upcoming year of the dragon I made these keychains. There are two versions. Version 1 is the complete version and version 2 is a reduced version if you prefer a more compact keychain.
For this print you will need a 0.2 nozzle because there are very small details.
There is a pause in the uploaded print profile at layer 47. This pause is used for manually changing the red filament to a white filament in the AMS. This is neseccary because the print uses 5 colors. If you have more then one AMS you can of course delete this pause :)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Filaments I have used for my print:
PLA OVERTURE Matte Black
PLA ERYONE Matte Marine Blue
PLA Amazon Basics Red
PLA extrudr BioFusion inca gold
PLA OVERTURE Matte White
Swap Instructions:
Start with Inca Gold
At layer #21 (1.7mm) swap to Black
At layer #42 (3.38mm) swap to Blue
At layer #43 (3.46mm) swap to Red
At layer #45 (3.62mm) swap to Inca Gold
At layer #49 (3.94mm) swap to White for the rest.
Happy printing :)
If you have questions then please ask.