Hi all! My kinder son's school mascot is a tiger and these were made as something for him to bring in Valentine's Day 2024.

This was my first attempt making something with a slot for a magnet, and while it didn't work out exactly as hoped (tigers kissing, the nose gets in the way) there is a heart in the download files that it can connect to. The slot included is slightly bigger than 5mmX5mmX2mm just in case of variance.

I have 4 different versions: 4 color/ 1 color magnet slot/none to chose from.

Pause is encoded at layer 35 for the magnet on models marked “Magnet”. Please choose the other if putting a magnet in is not your goal, or remember to remove the pause!

This is a private use file only: if you are planning on selling physical copies, please purchase the commercial version on cults at the link below. One purchase, commercial use for a life time.

https://cults3d.com/en/3d-model/game/valentine-s-tigerheart-commercial-use

• Note: the head can nod and move up, but there is not much movement down; it can stand without the chin touching the ground which was the goal. Also, the first heart on the tail is connected to both a vertical and horizontal link, that is done on purpose!