What it is

A light box/dot flashing the logo of the music band Rammstein. The top part is a lid that fits:

• Current Mittled LED spots from IKEA (USA) / IKEA (UK) / IKEA (DE) / … → These already have a mounting solution, are dimmable & prewired, work with 24V and stay cool during operation. Simply clip the printed part onto them and you're done.
• The printed bottom part for a 10mm wide LED strip of 250mm length. → A classic DIY approach.

How to print

Simply use the provided print file. The visible top is printed upside down, therefore your first layer needs to be spot on. It is printed rather slow to avoid gaps and other imperfections resulting from printing it too fast. The rest of the cylindrical walls are printed slow as well to ensure dimensional accuracy.

Recommended for printing is a layer height of 0.20mm and a 0.4mm nozzle. Material at one's discretion, I opted for PETG.

If it isn't obvious, at least one of the used filaments needs to be somewhat light-transmissive. - As shown in the pictures, regular red filament did it for me. When in doubt, do tests beforehand or use translucent filaments. In the given print file the thickness of the logo (and therefore transmissivety) is adjustable via changing the z-value of a negative volume modifier called “undercut_…”.

What next

More variants are in preparation, patience please. → If you have a specific idea or suggestions for variants, let me know :)

There may be improvements and modifications based on feedback given here.

Maybe, take a look at my other designs ;-)