Adapter for the Nerf EBF-25 to convert from 6 D-Cell batteries to the Dewalt 12v lithium. The connectors are just basic ¼ spade, and the hole is fitted to keep the heatshrink on the connectors. I used hot glue to keep them in place, but it is a snug fit to begin with.
Installation is remarkably easy, just disassemble, cut off the spring contacts, crimp on spade bit connectors, and away you go. I did put a 7.5a fuse in the + side just for additional protection.
Modify at your own risk. All liability is in your hands.