Layers (Layer Height): 0.2 mm for a balance between details and printing speed.

Print Temperature: 200-220 °C, optimized for PLA material.

Bed Temperature: 50 °C for better adhesion of the model to the bed.

Print Speed: 50 mm/s for stable and quality printing.

Infill: 15-20% for sufficient model strength.

Supports: Use supports only where absolutely necessary, such as under recesses or protrusions.

Cooling: Enable cooling to minimize deformations during the printing of smaller details.

Ensure that these values are adjusted to your 3D printer specifications and make adjustments as needed.