A guitar neck rest with optional soft material padding

Models

• Option 1:
  • Guitar neck stand with socket for a soft material interface with the guitar.
  • A strip to fit into the mentioned socket above. Intended to be printed of soft material to protect the guitar neck.
  • Files:
    • GuitarNeckRest.3mf
    • GuitarNeckRest.stl
    • GuitarNeckRest_softStrip.stl
• Option 2:
  • Guitar neck stand.
  • Files:
    • GuitarNeckRest_noSocket.3mf
    • GuitarNeckRest_noSocket.stl

Dimensions

• Option 1+2
  • Base width: 75 mm
  • Base depth: 49.7 mm
  • Height: 98.5 mm
  • Neck rest width: 57.1 mm
  • Neck rest depth: 13.2 mm
• Option 1
  • Neck rest strip width: 49.7 mm
  • Neck rest strip depth: 13.2 mm
  • Neck rest strip height (thickness): 3 mm

Print Instructions

Nothing special, printed Guitar Neck Rest with PLA and Soft Strip from TPU, both 0.2mm with 15% infill.
For the Soft Strip it is recommended to set a brim as the part touching the bed is quite thin.

Suggestions for improvements are most welcomed!