A 3D printable shroud for the MSI GTX 1080 Aero 8G OC gpu.

The shroud can be mounted in the same mounting points as the original shroud.
The dimensions are also nearly the same as the original.

For me, the best quality was achieved by printing the shroud in a 60 degree angle.
This way the screw holes dont snap on the bottom and layers dont seperate easily.
The details also pop better in this angle compared to printing it flat or upright.

My shrouds were printed in PLA, they withstood the 92 degree temps just fine during testing!
I used tree supports only at the bottom and 2 tiny spots on the front plate.