Solder Stand by Ruvim KUB

Ruvim KUB

Tools>Hand Tools

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.16mm layer, 2 walls, 15% infill

Designer

3.3 h

4 plates

4.8(8)

0.16mm layer, 2 walls, 15% infill

3.9 h

4 plates

Boost

110

178

117

Released

Description

Solder Stand

Hello! I know you have already seen hundreds and even thousands of soldering iron stands. But I hope that my version will also appeal to you and you won’t pass it by.

I want to say that recently I printed a case for the Wireless Mouse 002 and I was so impressed and inspired by its beautiful design that I came up with an idea to create a soldering iron stand in a similar style.I agree that I have a long way to go before reaching the level of Bambu designers, but I enjoyed creating this stand, and I happily use it.

As an innovation, I added a spring-loaded button that gently presses on the solder, preventing the solder wire from slipping out with every awkward movement.

All parts are 3D-printed, and there's no need to purchase anything extra.

And also I would like to tell you that I recently started a small store on Etsy.com here will appear instrementy and exclusive projects that will not be in the open access.

My some other things:

Comment & Rating (15)

@bruce.falkenste

Print Profile

0.16mm layer, 2 walls, 15% infill

Easy Print Thank you for your hard work

The designer has replied

@RuvimKUB

Thank you for your feedback! I really appreciate your time spent on this.

@Meri3D

Print Profile

0.16mm layer, 2 walls, 15% infill

printed without any problems. thanks for sharing.

The designer has replied

@RuvimKUB

Thank you for your feedback! I really appreciate your time spent on this.

@bruce.falkenste

Was not sure what the idea was with the 3 screw holes, so i made a base so I could inclose it. Love it. Thank you . Ruvim KUB if you want the stl for the bottem just msg me so I can upload it to you, because im not posting it.

(Edited)

The designer has replied

@RuvimKUB

Thank you for your feedback and your time. It was indeed a small mistake. I accidentally downloaded an earlier version of the project where the holes were planned to be used to attach to the wooden base. But later I decided to make a printed base and the holes were removed. I have already reloaded the model and now the most up to date one is there.

@linsenpago

Print Profile

0.16mm layer, 2 walls, 15% infill

Great looking easy print.. only thing is that the friction on the solder wire is a little bit to strong or the whole holder is to light. when I pull on the wire it lifts the holder.. I will pit some weight into the base to prevent this in the future